Skip to content

Welding

Our Welding Program offers state-of-the-art equipment and safety. The program prepares students for steady, high paying jobs in a variety of industries that utilize welders.

Skilled, certified welders can find work on construction sites, in petroleum-related industries and in many jobs where heavy equipment is used. Welding, soldering and brazing workers held about 452,000 jobs in 2002 and of these, about two out of every three were in manufacturing.

welding


Welding O.E.

Occupational endorsements are programs of study designed to give students intensive training in a specific occupational field.

Typically an occupational endorsement is less than 30 credits, and is not an eligible program for financial aid.

General Welding
Requirements (2014-2015 Catalog)

Minimum Credit Hours18
WELDS160Welding Orientations Lab3
WELDS161Welding Preparations, Quality, and Oxyfuel Cutting3
WELDS162Shielded Metal Arc Welding Basics3
WELDS163Shielded Metal Arc Welding Groove Welds3
WELDS260Introduction to Advanced Welding Techniques3
WELDS263Gas Tungsten Arc Welding3

UAS is an open enrollment institution, this means that you do not have to be in a UAS degree program to take a class. Anyone can take our classes as long as they meet the course pre-requisites.

View Full UAS Schedule

WELD Classes: Fall - 2014


WELD 120
3 CR

A beginning level course covering the fundamentals of oxyacetylene welding, brazing and cutting, and electric arc welding. Emphasis in flat and horizontal welding positions on mild steel using a variety of welding rods and techniques.

CRNSECTIONINSTRUCTORMEETS
79794J01Glenn Ramsey
WTEWELD
Tue, Thu
6:00p - 10:45p
9/2 - 10/16

Tuition and fees: $687 (additional charges may apply)

CRNSECTIONINSTRUCTORMEETS
80985K01Kenneth Horn
HAM106
Tue, Thu
6:00p - 8:50p
9/2 - 12/13

Tuition and fees: $787 (additional charges may apply)

CRNSECTIONINSTRUCTORMEETS
81900K02Robert Ball
HAM106
Mon - Fri
1:00p - 4:00p
11/3 - 11/21
HAM106
Mon, Tue, Wed
9:00a - 4:00p
11/24 - 11/26

This course is part of a cohort. Students must register for all courses in the cohort with the exception of MTR S129 BST, if they have had it in the recent past at UAS.

Tuition and fees: $537 (additional charges may apply)

WELD 120
3 CR

A beginning level course covering the fundamentals of oxyacetylene welding, brazing and cutting, and electric arc welding. Emphasis in flat and horizontal welding positions on mild steel using a variety of welding rods and techniques.

CRNSECTIONINSTRUCTORMEETS
79795TP1Andrew Bullick
JDHS
9/2 - 12/13

Tuition and fees: $75 (additional charges may apply)

CRNSECTIONINSTRUCTORMEETS
79796TP3Nicholas Popp
OTPETE
9/2 - 12/13

Tuition and fees: $75 (additional charges may apply)

CRNSECTIONINSTRUCTORMEETS
82050TP5Andrew Larrabee
OTWRAN
9/2 - 5/2

Tuition and fees: $75 (additional charges may apply)

Orients students to general welding. Includes developing safe practices, learning about the work environment, and procedures applicable to the cutting and welding of metals.

CRNSECTIONINSTRUCTORMEETS
80626T01Allen Puckett
SCHANGAR
Tue, Thu
6:30p - 9:00p
9/23 - 12/11

Tuition and fees: $757 (additional charges may apply)

CRNSECTIONINSTRUCTORMEETS
81668T80Allen Puckett
SCHANGAR
Mon - Fri
1:15p - 2:35p
8/25 - 10/17

For MEHS high school students ONLY.

CRNSECTIONINSTRUCTORMEETS
81669T81Allen Puckett
SCHANGAR
Mon - Fri
2:40p - 4:00p
8/25 - 10/17

For MEHS high school students ONLY.

Introduces students to the safety requirements of oxyfuel cutting. Identifies the equipment and setup requirements, and explains how to work with oxyfuel equipment. Introduces the process of cleaning and preparing all types of base metals for cutting or welding. Students learn the codes that govern welding and how to identify welding imperfections and their causes.

Prerequisite: WELD S160 or instructor permission.

CRNSECTIONINSTRUCTORMEETS
80627T01Allen Puckett
SCHANGAR
Tue, Thu
6:30p - 9:00p
9/23 - 12/11

Tuition and fees: $757 (additional charges may apply)

CRNSECTIONINSTRUCTORMEETS
81670T80Allen Puckett
SCHANGAR
Mon - Fri
1:15p - 2:35p
10/20 - 12/18

For MEHS high school students ONLY.

CRNSECTIONINSTRUCTORMEETS
81671T81Allen Puckett
SCHANGAR
Mon - Fri
2:40p - 4:00p
10/20 - 12/18

For MEHS high school students ONLY.

Introduces students to shielded metal arc welding (SMAW) operation and safety. Develops welding skills in making stringer, weave, overlapping beads, fillet welds.

Prerequisite; WELD S161 or instructor permission.

CRNSECTIONINSTRUCTORMEETS
80628T01Allen Puckett
SCHANGAR
Tue, Thu
6:30p - 9:00p
9/23 - 12/11

Tuition and fees: $757 (additional charges may apply)

CRNSECTIONINSTRUCTORMEETS
81675T80Allen Puckett
SCHANGAR
Mon - Fri
1:15p - 2:35p
8/25 - 10/17

For MEHS high school students ONLY.

CRNSECTIONINSTRUCTORMEETS
81685T81Allen Puckett
SCHANGAR
Mon - Fri
2:40p - 4:00p
8/25 - 10/17

For MEHS high school students ONLY.

Continues shielded metal arc welding (SMAW) operations, developing skills in groove welds with backing. Also introduces the concepts of fit-up and alignment.

Prerequisite: WELD S162 or instructor permission.

CRNSECTIONINSTRUCTORMEETS
80629T01Allen Puckett
SCHANGAR
Tue, Thu
6:30p - 9:00p
9/23 - 12/11

Tuition and fees: $757 (additional charges may apply)

CRNSECTIONINSTRUCTORMEETS
81686T80Allen Puckett
SCHANGAR
Mon - Fri
1:15p - 2:35p
8/25 - 10/17

For MEHS high school students ONLY.

CRNSECTIONINSTRUCTORMEETS
82131T81Allen Puckett
SCHANGAR
Mon - Fri
2:40p - 4:00p
8/25 - 10/17

Designed for advanced welders to further their skills in one or more processes and levels. Topics may include aluminum welding, sheet welding, shield metal arc welding, pipe welding, flux-core arc welding, or other to be announced. May be repeated for credit when content varies.

Prerequisite: WELD S120 or instructor permission.

CRNSECTIONINSTRUCTORMEETS
79797J01Glenn Ramsey
WTEWELD
Tue, Thu
6:00p - 10:45p
10/21 - 12/9

Tuition and fees: $687 (additional charges may apply)

CRNSECTIONINSTRUCTORMEETS
80630T01Allen Puckett
SCHANGAR
Tue, Thu
6:30p - 9:00p
9/23 - 12/11

Tuition and fees: $932 (additional charges may apply)

Introduces students to the different types of welding symbols, identifies and explains detailed drawings, and explains how to use notes on drawings and bills of materials. Also covers air and plasma arc cutting, and introduces students to gas metal arc and flux cored arc weld

Prerequisite: AWS Level I certification or instructor permission.

CRNSECTIONINSTRUCTORMEETS
80631T01Allen Puckett
SCHANGAR
Tue, Thu
6:30p - 9:00p
9/23 - 12/11

Tuition and fees: $757 (additional charges may apply)

CRNSECTIONINSTRUCTORMEETS
81689T80Allen Puckett
SCHANGAR
Mon - Fri
1:15p - 2:35p
10/20 - 12/18

For MEHS high school students ONLY.

CRNSECTIONINSTRUCTORMEETS
81690T81Allen Puckett
SCHANGAR
Mon - Fri
2:40p - 4:00p
10/20 - 12/18

For MEHS high school students ONLY.

Introduces students to equipment set up and safety for gas tungsten arc welding (GTAW). Explains procedures to perform multiple positions and types of welds using GTAW. Completion of this course qualifies the student to seek AWS Level II certification.

Prerequisite: WELD S262 or instructor permission.

CRNSECTIONINSTRUCTORMEETS
80632T01Allen Puckett
SCHANGAR
Tue, Thu
6:30p - 9:00p
9/23 - 12/11

Tuition and fees: $757 (additional charges may apply)

CRNSECTIONINSTRUCTORMEETS
82132T80Allen Puckett
SCHANGAR
Mon - Fri
1:15p - 2:35p
10/20 - 12/19
CRNSECTIONINSTRUCTORMEETS
82133T81Allen Puckett
SCHANGAR
Mon - Fri
2:40p - 4:00p
10/20 - 12/19
 
 

Content maintained by Admissions.