Skip to content
 Scroll To Top
View Full UAS Schedule

2016 Spring Classes

WELD Welding Tech

WELD 120
3 CR
A beginning level course covering the fundamentals of oxyacetylene welding, brazing and cutting, and electric arc welding. Emphasis in flat and horizontal welding positions on mild steel using a variety of welding rods and techniques.
CRN SECTION INSTRUCTOR MEETS
35905 J01 Glenn Ramsey
Welding Tech WELD
Tue, Thu
5:45p - 10:45p
1/12 - 2/25

No notes

Tuition and fees: $849 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
35907 TP1 Andrew Bullick,
Kimberly Szczatko
JDHS
1/11 - 4/30

No notes

Tuition and fees: $204 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
35908 TP9 Earl Jeffrey,
Kimberly Szczatko
OT KLAW
1/11 - 4/30

No notes

Tuition and fees: $204 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
38565 K01 Kenneth Horn
HAM 103
Mon, Wed
5:30p - 8:30p
1/11 - 4/30
HAM 106
Mon, Wed
5:30p - 8:30p
1/11 - 4/30

No notes

Tuition and fees: $830 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
39763 TP4 Earl Jeffrey,
Kimberly Szczatko
OT CRAIG
1/11 - 4/30

No notes

Tuition and fees: $204 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
39765 TP3 Dave Owens,
Kimberly Szczatko
OT PETE
1/11 - 4/30

No notes

Tuition and fees: $204 (additional charges may apply)

WELD 160
3 CR
Orients students to general welding. Includes developing safe practices, learning about the work environment, and procedures applicable to the cutting and welding of metals.
CRN SECTION INSTRUCTOR MEETS
38350 T01 Allen Puckett
SC HANGAR
Tue, Thu
6:30p - 8:30p
1/11 - 4/30

Student Insurance: $5.15.

Tuition and fees: $835 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
39933 T80 Allen Puckett
SC HANGAR
Mon - Fri
1:15p - 2:35p
1/11 - 3/3

No notes

Tuition and fees: $60 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
39939 T81 Allen Puckett
SC HANGAR
Mon - Fri
2:40p - 4:00p
1/11 - 3/4

No notes

Tuition and fees: $60 (additional charges may apply)

Introduces students to the safety requirements of oxyfuel cutting. Identifies the equipment and setup requirements, and explains how to work with oxyfuel equipment. Introduces the process of cleaning and preparing all types of base metals for cutting or welding. Students learn the codes that govern welding and how to identify welding imperfections and their causes.
CRN SECTION INSTRUCTOR MEETS
38352 T01 Allen Puckett
SC HANGAR
Tue, Thu
6:30p - 9:00p
1/11 - 4/30

Prerequisite: WELD S160 or instructor permission.

Student Insurance: $5.15.

Tuition and fees: $835 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
39940 T80 Allen Puckett
SC HANGAR
Mon - Fri
1:15p - 2:35p
3/7 - 4/30
SC HANGAR
Saturday
8:00a - 5:00p
3/12 - 3/12

Prerequisite: WELD S160 or instructor permission.

No notes

Tuition and fees: $60 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
39941 T81 Allen Puckett
SC HANGAR
Mon - Fri
2:40p - 4:00p
3/7 - 4/30
SC HANGAR
Saturday
8:00a - 5:00p
3/12 - 3/12

Prerequisite: WELD S160 or instructor permission.

No notes

Tuition and fees: $60 (additional charges may apply)

Introduces students to shielded metal arc welding (SMAW) operation and safety. Develops welding skills in making stringer, weave, overlapping beads, fillet welds.
CRN SECTION INSTRUCTOR MEETS
38353 T01 Allen Puckett
SC HANGAR
Tue, Thu
6:30p - 9:00p
1/11 - 4/30

Prerequisite; WELD S161 or instructor permission.

Student Insurance: $5.15.

Tuition and fees: $835 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
39943 T80 Allen Puckett
SC HANGAR
Mon - Fri
1:15p - 2:35p
1/11 - 3/4
SC HANGAR
Saturday
8:00a - 5:00p
1/30 - 1/30

Prerequisite; WELD S161 or instructor permission.

No notes

Tuition and fees: $60 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
39945 T81 Allen Puckett
SC HANGAR
Mon - Fri
2:40p - 4:00p
1/11 - 3/4
SC HANGAR
Saturday
8:00a - 5:00p
1/30 - 1/30

Prerequisite; WELD S161 or instructor permission.

No notes

Tuition and fees: $60 (additional charges may apply)

Continues shielded metal arc welding (SMAW) operations, developing skills in groove welds with backing. Also introduces the concepts of fit-up and alignment.
CRN SECTION INSTRUCTOR MEETS
38357 T01 Allen Puckett
SC HANGAR
Tue, Thu
6:15p - 9:00p
1/11 - 4/30

Prerequisite: WELD S162 or instructor permission.

Student Insurance: $5.15.

Tuition and fees: $835 (additional charges may apply)

Designed for advanced welders to further their skills in one or more processes and levels. Topics may include aluminum welding, sheet welding, shield metal arc welding, pipe welding, flux-core arc welding, or other to be announced. May be repeated for credit when content varies.
CRN SECTION INSTRUCTOR MEETS
38338 J01 Glenn Ramsey
Welding Tech WELD
Tue, Thu
6:00p - 10:45p
3/1 - 4/30

Prerequisite: WELD S120 or instructor permission.

No notes

Tuition and fees: $849 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
38358 T01 Allen Puckett
SC HANGAR
Tue, Thu
6:30p - 9:00p
1/11 - 4/30

Prerequisite: WELD S120 or instructor permission.

Student Insurance: $5.15.

Tuition and fees: $835 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
38566 K01 Kenneth Horn
HAM 103
Tue, Thu
5:30p - 8:30p
1/11 - 4/30
HAM 106
Tue, Thu
5:30p - 8:30p
1/11 - 4/30

Prerequisite: WELD S120 or instructor permission.

Students are required to have leather boots, welding gloves and head covering.

Tuition and fees: $830 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
39946 T80 Allen Puckett
SC HANGAR
Mon - Fri
1:15p - 2:35p
1/11 - 3/4
SC HANGAR
Saturday
8:00a - 5:00p
1/30 - 1/30

Prerequisite: WELD S120 or instructor permission.

No notes

Tuition and fees: $60 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
39947 T81 Allen Puckett
SC HANGAR
Mon - Fri
2:40p - 4:00p
1/11 - 3/4

Prerequisite: WELD S120 or instructor permission.

No notes

Tuition and fees: $60 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
39948 T82 Allen Puckett
SC HANGAR
Mon - Fri
2:40p - 4:00p
3/7 - 4/30

Prerequisite: WELD S120 or instructor permission.

No notes

Tuition and fees: $60 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
39949 T83 Allen Puckett
SC HANGAR
Mon - Fri
1:15p - 2:35p
3/7 - 4/30
Saturday
8:00a - 5:00p
3/12 - 3/12

Prerequisite: WELD S120 or instructor permission.

No notes

Tuition and fees: $60 (additional charges may apply)

Designed for advanced welders to further their skills in one or more processes and levels. Topics may include aluminum welding, sheet welding, shield metal arc welding, pipe welding, flux-core arc welding, or other to be announced. May be repeated for credit when content varies.
CRN SECTION INSTRUCTOR MEETS
35909 TP4 Earl Jeffrey,
Kimberly Szczatko
OT CRAIG
1/11 - 4/30

Prerequisite: WELD S120 or instructor permission.

No notes

Tuition and fees: $204 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
39767 TP5 Andrew Larrabee,
Kimberly Szczatko
OT WRAN
1/11 - 4/30

Prerequisite: WELD S120 or instructor permission.

No notes

Tuition and fees: $204 (additional charges may apply)

Introduces students to the different types of welding symbols, identifies and explains detailed drawings, and explains how to use notes on drawings and bills of materials. Also covers air and plasma arc cutting, and introduces students to gas metal arc and flux cored arc weld
CRN SECTION INSTRUCTOR MEETS
38361 T01 Allen Puckett
SC HANGAR
Tue, Thu
6:30p - 8:30p
1/11 - 4/30

Prerequisite: AWS Level I certification or instructor permission.

Student Insurance $5.15.

Tuition and fees: $835 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
39950 T80 Allen Puckett
SC HANGAR
Mon - Sat
1:15p - 2:35p
3/7 - 4/30

Prerequisite: AWS Level I certification or instructor permission.

No notes

Tuition and fees: $60 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
39951 T81 Allen Puckett
SC HANGAR
Mon - Fri
2:40p - 4:00p
3/7 - 4/30

Prerequisite: AWS Level I certification or instructor permission.

No notes

Tuition and fees: $60 (additional charges may apply)

WELD 263
3 CR
Introduces students to equipment set up and safety for gas tungsten arc welding (GTAW). Explains procedures to perform multiple positions and types of welds using GTAW. Completion of this course qualifies the student to seek AWS Level II certification.
CRN SECTION INSTRUCTOR MEETS
38363 T01 Allen Puckett
SC HANGAR
Tue, Thu
6:30p - 9:00p
1/11 - 4/30

Prerequisite: WELD S262 or instructor permission.

Student Insurance $5.15.

Tuition and fees: $835 (additional charges may apply)

 
View Full UAS Schedule

2016 Summer Classes

WELD Welding Tech

WELD 120
3 CR
A beginning level course covering the fundamentals of oxyacetylene welding, brazing and cutting, and electric arc welding. Emphasis in flat and horizontal welding positions on mild steel using a variety of welding rods and techniques.
CRN SECTION INSTRUCTOR MEETS
52424 K01 Kenneth Horn
HAM 103
Tue, Wed
5:00p - 8:40p
5/17 - 7/20
HAM 106
Tue, Wed
5:00p - 8:40p
5/17 - 7/20

No notes

Tuition and fees: $830 (additional charges may apply)

Designed for advanced welders to further their skills in one or more processes and levels. Topics may include aluminum welding, sheet welding, shield metal arc welding, pipe welding, flux-core arc welding, or other to be announced. May be repeated for credit when content varies.
CRN SECTION INSTRUCTOR MEETS
52425 K01 Kenneth Horn
HAM 103
Tue, Wed
5:00p - 8:40p
5/17 - 7/20
HAM 106
Tue, Wed
5:00p - 8:40p
5/17 - 7/20

Prerequisite: WELD S120 or instructor permission.

No notes

Tuition and fees: $830 (additional charges may apply)

 
View Full UAS Schedule

2016 Fall Classes

WELD Welding Tech

WELD 120
3 CR
A beginning level course covering the fundamentals of oxyacetylene welding, brazing and cutting, and electric arc welding. Emphasis in flat and horizontal welding positions on mild steel using a variety of welding rods and techniques.
CRN SECTION INSTRUCTOR MEETS
73221 J01 Glenn Ramsey
Welding Tech WELD
Tue, Thu
6:00p - 10:45p
8/29 - 12/17

No notes

Tuition and fees: $891 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
77559 K01 Kenneth Horn
HAM 103
Mon, Wed
5:30p - 8:30p
8/29 - 12/17
HAM 106
Mon, Wed
5:30p - 8:30p
8/29 - 12/17

Students must provide leather boots, welding gloves and head covering.

Tuition and fees: $875 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
77562 K02 Kenneth Horn
HAM 103
Mon - Fri
12:00p - 4:10p
9/19 - 10/7
HAM 106
Mon - Fri
12:00p - 4:10p
9/19 - 10/7

Students must provide leather boots, welding gloves and head covering. This class is part of a cohort. Students must register for all courses in the cohort with the exception of MTR 129, Basic Safety Training, which they may omit of previously taken.

Tuition and fees: $675 (additional charges may apply)

Introduces students to the safety requirements of oxyfuel cutting. Identifies the equipment and setup requirements, and explains how to work with oxyfuel equipment. Introduces the process of cleaning and preparing all types of base metals for cutting or welding. Students learn the codes that govern welding and how to identify welding imperfections and their causes.
CRN SECTION INSTRUCTOR MEETS
77925 T01 Allen Puckett
SC HANGAR
Tue, Thu
6:30p - 9:00p
8/29 - 12/17

Prerequisite: WELD S160 or instructor permission.

No notes

Tuition and fees: $880 (additional charges may apply)

Introduces students to shielded metal arc welding (SMAW) operation and safety. Develops welding skills in making stringer, weave, overlapping beads, fillet welds.
CRN SECTION INSTRUCTOR MEETS
77926 T01 Allen Puckett
SC HANGAR
Tue, Thu
6:30p - 9:00p
8/29 - 12/17

Prerequisite; WELD S161 or instructor permission.

No notes

Tuition and fees: $880 (additional charges may apply)

Continues shielded metal arc welding (SMAW) operations, developing skills in groove welds with backing. Also introduces the concepts of fit-up and alignment.
CRN SECTION INSTRUCTOR MEETS
77927 T01 Allen Puckett
SC HANGAR
Tue, Thu
6:30p - 9:00p
8/29 - 12/17

Prerequisite: WELD S162 or instructor permission.

No notes

Tuition and fees: $880 (additional charges may apply)

Designed for advanced welders to further their skills in one or more processes and levels. Topics may include aluminum welding, sheet welding, shield metal arc welding, pipe welding, flux-core arc welding, or other to be announced. May be repeated for credit when content varies.
CRN SECTION INSTRUCTOR MEETS
77560 K01 Kenneth Horn
HAM 106
Tue, Thu
5:30p - 8:30p
8/29 - 12/17
HAM 103
Tue, Thu
5:30p - 8:30p
8/29 - 12/17

Prerequisite: WELD S120 or instructor permission.

Students must provide leather boots, welding gloves and head covering.

Tuition and fees: $875 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
77928 T01 Allen Puckett
SC HANGAR
Tue, Thu
6:30p - 9:00p
8/29 - 12/17

Prerequisite: WELD S120 or instructor permission.

No notes

Tuition and fees: $880 (additional charges may apply)

CRN SECTION INSTRUCTOR MEETS
78280 K02 Kenneth Horn
HAM 106
Mon - Fri
12:00p - 4:10p
9/19 - 10/7
HAM 103
Mon - Fri
12:00p - 4:10p
9/19 - 10/7

Prerequisite: WELD S120 or instructor permission.

This class is part of a cohort. Students must register for all courses in the cohort with the exception of MTR S129, Basic Safety Training, which they may omit if previously taken. Students must have WELD 120 or instructor permission to register for this course.

Tuition and fees: $850 (additional charges may apply)

Introduces students to the different types of welding symbols, identifies and explains detailed drawings, and explains how to use notes on drawings and bills of materials. Also covers air and plasma arc cutting, and introduces students to gas metal arc and flux cored arc weld
CRN SECTION INSTRUCTOR MEETS
77929 T01 Allen Puckett
SC HANGAR
Tue, Thu
6:30p - 9:00p
8/29 - 12/17

Prerequisite: AWS Level I certification or instructor permission.

No notes

Tuition and fees: $880 (additional charges may apply)

WELD 263
3 CR
Introduces students to equipment set up and safety for gas tungsten arc welding (GTAW). Explains procedures to perform multiple positions and types of welds using GTAW. Completion of this course qualifies the student to seek AWS Level II certification.
CRN SECTION INSTRUCTOR MEETS
77954 T01 Allen Puckett
SC HANGAR
Tue, Thu
6:30p - 9:00p
8/29 - 12/17

Prerequisite: WELD S262 or instructor permission.

No notes

Tuition and fees: $880 (additional charges may apply)

 
 
 

Content maintained by School of Career Education.